Selected Handgun Detail

Radom
Model P-64 Czak
Radom Pistol P-64 Czak 9x18 Makarov Variant-1
Scale To:
Gun Dimensions Width:No Data
Length:6.3-in Height:4.6-in
Barrel:3.3-in Weight:22-oz
1 Variant
Gun Rankings
  • Power Factor (95 grain bullet)92245
  • Recoil Factor (95 grain bullet)2.92 ft-lb
  • Total Capacity7 rounds
  • ConcealabilityGood
  • Defense Factor54%
Gun Specifications
Type:Pistol
Caliber:9x18 Makarov
Action:blowback operated semi-auto
Trigger:double-action (DA/SA)
Safety:slide mounted decock/safety lever
Magazine:6-round
Frame:blued finish steel
Grip:black checkered plastic
Sights:fixed blade and notch
Notes:
Manufacturer
Fabryka Broni 'Lucznik'-Radom Sp. z o.o.
More Info
About the Gun

The P-64 was initially developed in the late 1950s at the Polish Institute for Artillery Research. In 1965 it entered service with the Polish army, police and security forces and continued in service until it was replaced by the P-83 in 1983.

Production

Production of this firearm began in 1965 and continued until 1977, with manufacturing taking place in Poland. The majority of units were produced during the late 1960s and early 1970s, reflecting its historical context within Cold War-era designs.

Market value
Last updated: 7/10/2025

For this gun, the MSRP is approximately $300-$350 based on historical data. Used market value in 95% condition is around $250-$300 as of 2024-2025 market trends.

Cartridge Specifications
Cartridge: 9x18mm Makarov
Alias: N/A
More Info
Ballistics for This Gun
Selected Bullet Mass:95 grains
MV:971 ft/sec ME:199 ft-lbs
Analysis

This 9x18 Makarov caliber pistol, a product of Polish engineering, offers a compact design well-suited for concealed carry or as a backup firearm. Its accuracy is commendable for a handgun of its size, delivering consistent performance at typical self-defense ranges. The ergonomics are functional, with a grip that fits most hands adequately, though some users may find it less comfortable during extended sessions. Reliability is a strong point, as it operates effectively even under less-than-ideal conditions with proper care. However, maintenance can be cumbersome due to its dated design, and sourcing replacement parts can pose challenges, especially outside of specific markets. The trigger pull is notably heavy, which may affect precision for some shooters, while the felt recoil is moderate, manageable for most but potentially sharp for those unaccustomed to the cartridge. Overall, it remains a practical choice with historical significance, though modern alternatives may offer greater convenience.

User Rating
2 User Ratings
2 User Comments
User Comments

2 of 5 Stars
Disappointing
By mojo357 on 05 Jul 2021
I had high hopes when I bought my P64. Loved the size and power and the sturdy steel build. But the bad outweighed the good. First, reliability. Couldn't get through a single 6 round mag without fail-to-fires - until I polished the feed ramp for the umpteenth time and finally cured it. If you have one that is misfiring, get out the dremel and carefully polish that feed ramp a little at a time until you hit the sweet spot. Second, recoil. Very punishing gun to shoot. No fun at the range. Third, slide bite. You need to hold this gun very precisely. It has a nasty bite if the skin near your thumb gets caught by the sharp moving slide. Fourth, disassembly. It's easy to do a simple breakdown but for a full tear-down it has an eccentric flat spring that is a bitch to insert into its slot. And if I recall correctly, you have to watch out for other small springs that are easy to lose, so it's wise to do any work on it in a special box.


4 of 5 Stars
P64
By Benny on 09 Apr 2021
Sweet weapon. Small but yet gets the job done.